The use of an insulating glass unit per unit area of the mass reduction
caused the test transparent perspex material used in the intermediate layer of insulating glass, so as to achieve a mass decrease per unit area, thereby reducing the weight of the glass. Insulating glass is widely used in the market, Tomoaki high useful meaning to try, in order to study this project, the use of thinner glass and transparent plexiglass sheet, transparent sandwich.
The research report produced by a series of thin glass plate configuration and format contour map, showing the bending tensile stress and deflection due to exposure to weather and wind loads.
Other studies, including analysis of the performance and compatibility of materials, the aging performance and structure fixed details, affect the use of materials and laminated plastic sheet glass cavity Fitness boundary conditions. The research project has been following some of the conclusions, which is the final report in the form of charts and tables detail:
1, in a small hollow glass unit, the climate load is a critical factor, nonlinear theory used herein, no benefit. The same applies to the long, narrow unit.
For short section (about 65 cm) and a thickness of 4 mm and 3 mm pane, toughening is necessary. However, under normal circumstances, require more stringent thin pane is not greater than 4 mm float glass steel is required - thus increasing the hardness of the glass.
2, due to its quality decreases, the thin glass plate symmetrical configuration is basically a lower airborne sound insulation effects than traditional pane. But it is possible to compensate for this negative effect, by the non-symmetrically disposed hollow glass. Regardless of whether the pane is thin glass, laminated glass or transparent plastic plate material, it will not have any significant impact of airborne sound insulation.
Clicks:
3990 Updated:2013/4/13 12:38:40 【
Print】 【
Close】
